curr_range = '1uA' # The name of the current range [-100uA, +100uA]

sample_rate = 10.0 # The number of samples/second to collect

volt_min = -1.0 # The minimum voltage in the waveform (V)

volt_max = 1.0 # The maximum voltage in the waveform (V)

volt_per_sec = 0.1 # The rate at which to transition from volt_min to volt_max (V/s)

num_cycles = 1 # The number of cycle in the waveform

I will attach the plot for your reference

Do I have to calibrate the device using the dummy cell? I read a post saying Rodeostat doesn't require calibration.

link text

Thanks.

curr_range = '1uA' # The name of the current range [-100uA, +100uA]

sample_rate = 10.0 # The number of samples/second to collect

volt_min = -1.0 # The minimum voltage in the waveform (V)

volt_max = 1.0 # The maximum voltage in the waveform (V)

volt_per_sec = 0.1 # The rate at which to transition from volt_min to volt_max (V/s)

num_cycles = 1 # The number of cycle in the waveform

I will attach the plot for your reference

Do I have to calibrate the device using the dummy cell? I read a post saying Rodeostat doesn't require calibration.

link text

Thanks.