Navigation

    IO Rodeo Forum

    • Register
    • Login

    Screen Printed Electrode Edge Connector Part No.

    Rodeostat
    3
    4
    1151
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mbeneck last edited by

      Howdy! I'm looking to find some edge connectors use with Zensor and Dropsens screen printed electrodes, and I saw y'all sell connectors for them for the rodeostat. Do you have a part number for the 2 connectors (just the piece connecting to the SPE)? Searching digikey hasn't turned up much, and I don't have a Rodeostat, so purchasing your adapters won't get me too far. Thanks!

      1 Reply Last reply Reply Quote 0
      • W
        Will Dickson last edited by

        The Digikey part number for the type-B adapter card edge connector is A101966-ND

        https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/7-5530843-7/2310829?s=N4IgTCBcDaIIIEYAMCCcA2dBaAdgExAF0BfIA

        1 Reply Last reply Reply Quote 0
        • M
          mbeneck last edited by

          Thanks @Will-Dickson! Interesting, what was holding me up in finding edge connectors was the thickness of the DropSens and Zensor SPEs - .02" (.051mm). Seems like all the edge connectors are for 0.054"" ~ 0.070"" thick cards. But you're still able to make contact with the thinner SPEs? Or do you shove a shim in there as well?

          Anybody have a part number for the type-C adapter?

          A 1 Reply Last reply Reply Quote 0
          • A
            admin @mbeneck last edited by

            @mbeneck

            You need to put a shim/spacer in there for good contact. Sometimes the SPEs come with it, otherwise you can just cut a little bit of card stock.

            1 Reply Last reply Reply Quote 0
            • First post
              Last post