Power source sensitivity
-
Hi @Will-Dickson,
I'm experiencing a lot of noise on my measurements with the Potentiostat based on Teensy3.2. Any suggestions on how to improve it?
It was first connected to my computer through a USB 3.0 HUB. I changed it to a dedicated port, it was better, but not much.I thought changing to a better power source would improve it, so I've been thinking about one of these paths https://www.pjrc.com/teensy/external_power.html. The USB Cable modification would be the easiest, but not sure if I'll get much better results.
Thanks,
rcbb