Navigation

    IO Rodeo Forum

    • Register
    • Login

    Power source sensitivity

    Rodeostat
    1
    2
    342
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R
      rcbb last edited by

      Hi @Will-Dickson,

      I'm experiencing a lot of noise on my measurements with the Potentiostat based on Teensy3.2. Any suggestions on how to improve it?
      It was first connected to my computer through a USB 3.0 HUB. I changed it to a dedicated port, it was better, but not much.

      I thought changing to a better power source would improve it, so I've been thinking about one of these paths https://www.pjrc.com/teensy/external_power.html. The USB Cable modification would be the easiest, but not sure if I'll get much better results.

      Thanks,
      rcbb

      R 1 Reply Last reply Reply Quote 0
      • R
        rcbb @rcbb last edited by

        @rcbb

        Hi, @Will-Dickson,

        I've been running some experiments with the Potentiostat, but I'm getting a lot of noise. At first I thought it was the power source, but I've changed it and still get noisy measurements.
        Noise

        I'm running cyclic test, from 0.5 to 1.2, with volt/sec in 0.05.
        Any idea?

        rcbb

        1 Reply Last reply Reply Quote 0
        • First post
          Last post