I would like to run the sinusoid test at frequency of 2kHz. I read from http://forum.iorodeo.com/topic/97/impedance-spectroscopy-and-manual-control-sampling-rate/11 that @Will-Dickson suggested to read values from LookUpTable directly instead of doing interpolation method that the firmware is currently using.

I have trouble in modifying the firmware to achieve that. I would appreciate it if anyone who has encountered similar problem to shed some light. Thanks!

Hi all,

I am using Rodeostat to run cyclic voltammetry test on my sample and as the test is running, I have another device (RedPitaya) that reads signal of another form from the sample. I could plot the data from both devices on the same graph but they are not in sync (this can be understood since both devices are running in different time system). Essentially, I want to read data from both devices at the same instant. What I have in mind is to read data from RedPitaya, and then from Rodeostat, store the data and plot them on the same time axis (which I will create on my own). However, I am not sure how to achieve that in the Python code or the firmware.

Is the possible to solve the above problem with software approach?

Any help is much appreciated!